Technologies
Analog
CDMA
GSM
Satellite
TDMA
3G
Other
Phones
Information
Manuals
Ringtones
Technical
Services
Software
Links
Forums
News
Reviews
SMS
Articles
Assorted
Bluetooth
Data
Etiquette
Health
Phones
SMS
Statistics
WAP
Tech Info - Nokia TC2000
Nokia
TC2000
NOTES: This is a single NAM unit.
The ESN prefix is 165 decimal, A5 hex.
1. Turn power on.
2. Enter * 1 7 * 1 0 0 3 * S S S S S *, where SSSSS is the security code, 12345 is the
factory default. If the security code is unknown see notes following programing data.
3. The SEL key stores and increments each step.
4. The phone will exit programing mode automatically after the last step, or you can press
SEL END at any time.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
0 00000 - 32767 HO id SYSTEM ID
1 0 OR 1 ACCESS MIN MARK
2 0 OR 1 LOCAL LOCAL USE MARK
3 10 DIGITS Phone n MIN (AREA CODE & TEL#)
4 2 DIGITS CLASS STATION CLASS MARK
5 333 OR 334 PAGE ch INITIAL PAGING CHANNEL
6 2 DIGITS O LOAd ACCESS OVERLOAD CLASS
8 2 DIGITS GrouP GROUP ID (10 IN USA)
9 4 DIGITS Loc CodE LOCK CODE
LOCK: SEL LCK, UNLOCK: LOCK CODE
SYSTEM SELECT: SEL 1, THEN 1 UNTIL DESIRED OPTION IS SHOWN:
S = PREF/NON PREF
A = A ONLY
b = B ONLY
If the security code us unknown you can try the following:
1. Open the handset connector (black "D" plug) and solder a jumper between pins
1 and 14.
2. Remove the handset ear-piece pad to expose a hex screw, remove this screw.
3. Remove the two rubber plugs located either side of the microphone, remove the two
screws.
4. Carefully split the handset apart.
5. Locate the white 28 pin connector that connects the two PCB's, just below this
connector is a factory installed jumper. Install a second jumper to the left of the
factory installed one.
6. Reasemble hanset and connector.
7. Congratulations! You now have a Mobira test handset. This modification is transparent
during normal operation.
PROGRAMING:
1. Enter LOCAL MODE (test mode) by pressing 01# (you will hear static from the ear piece).
2. Enter NAM program mode by pressing 48#.