Technologies
Analog
CDMA
GSM
Satellite
TDMA
3G
Other

Phones
Information
Manuals
Ringtones
Technical

Services
Software
Links
Forums
News
Reviews
SMS

Articles
Assorted
Bluetooth
Data
Etiquette
Health
Phones
SMS
Statistics
WAP

Tech Info - Nokia 101

Nokia 101

NOTES: These are dual NAM units.
The ESN prefix is 142 decimal & 8E hex.

NAM PROGRAMING:

1. Turn on power.
2. Enter * 3 0 0 1 # S S S S S STO 0 0, where SSSSS is the security code, default is 12345, the phone should display "STORE NOT DONE", if it displays "NOT ALLOWED" then the security code was incorrect and the phone can not be programed.
3. This phone is unusual as all programing data is stored in three memory locations.

LOCATION 01:

This entry contains emergency numbers, language code and lock code in the following format:
(emerg number 1) # (emerg number 2)... # (language code) * (lock code)
For example: 911 # *911 # 0 * 1234
The language codes are: 0 for English, 1 for French and 2 for Spanish.
Press and hold CLR until the display clears. Enter the data in one long string then press STO 01 STO

LOCATION 02 (NAM 1) and 04 (NAM 2)

This entry contains the MIN (area code and tel#) and optionally a 16 character alpha name, in the following format:
(area code,tel number) ALPHA (up to 16 characters) ALPHA
Note that "0" enters a space when in alpha mode.
Press and hold CLR until the display clears. Enter the data in one long string then press STO 02 STO, or STO 04 STO.

LOCATION 03 (NAM 1) and 05 (NAM 2):

This entry contains system parameters in the following format:
(system id) * (access method, 0 or 1) * (local use mark, 0 or 1) * (initial paging channel) * (access overload class) * (group ID)
For example: 31*1*1*333*02*10
Note that leading zeros are not required for SIDH & IPCH.
Press and hold CLR until the display clears.
Enter the data in one long string then press STO 03 STO, or STO 05 STO.
To verify any information press and hold CLR until the display clears, press RCL followed by the memory location.
To exit programing mode turn off power, if "NAM ERROR" appears when you power the phone back up an error was made in programing, reprogram the phone.