Technologies
Analog
CDMA
GSM
Satellite
TDMA
3G
Other

Phones
Information
Manuals
Ringtones
Technical

Services
Software
Links
Forums
News
Reviews
SMS

Articles
Assorted
Bluetooth
Data
Etiquette
Health
Phones
SMS
Statistics
WAP

Tech Info - Nokia 100

Nokia 100

1.Access programming mode by turning phone on and entering the following access code:- *3001#12345
2.Enter (STO) 00.Verify that "STORE NOT DONE" appears in the display. If "NOT ALLOWED" appears, check to see if you have entered the access code correctly.
3.Press and hold the (CLR) key until the display clears.
4.Enter 000#*000#0*, then the 4 digit Lock Code (XXXX). Note: The factory default "Lock Code" is "1234".
5.Enter (STO) 01 (STO).
6.Press and hold the (CLR) key until the display clears.
7.Enter phone number -eg: 5050XXXXXX for 018 numbers or 5060XXXXXX for 015 numbers.
8.Press (STO) 02 (STO).
9.Press and hold the (CLR) key until the display clears.
10.Enter the following sequence (SID CODE) * 1 * 1 * 333 * ( 0 & LAST DIGIT OF PHONE NUMBER ) * 05 Note: Do not forget the * 05 at the end of the sequence.
11.Enter (STO) 03 (STO)
12.Press and hold the (CLR) key until the display clears.
13.You may view the contents of each location by pressing ^.
14.To exit the programming mode, power the phone off then back on. If "NAM ERROR" appears on the display, programming was done incorrectly and must be
repeated.